ZeePedia Add to Favourites   |   Contact us


Advance Computer Architecture

<<< Previous CISC microprocessor:The Motorola MC68000, RISC Architecture:The SPARC Next >>>
 
img
Advanced Computer Architecture-CS501
Lecture Handouts
Computer Architecture
Lecture No. 11
Reading Material
Vincent P. Heuring&Harry F. Jordan
Chapter 3
Computer Systems Design and Architecture
3.3, 3.4
Summary
5) A CISC microprocessor:The Motorola MC68000
6) A RISC Architecture:The SPARC
Material of this Lecture is included in the above-mentioned sections of Chapter 3.
Page 149
Last Modified: 01-Nov-06
Table of Contents:
  1. Computer Architecture, Organization and Design
  2. Foundations of Computer Architecture, RISC and CISC
  3. Measures of Performance SRC Features and Instruction Formats
  4. ISA, Instruction Formats, Coding and Hand Assembly
  5. Reverse Assembly, SRC in the form of RTL
  6. RTL to Describe the SRC, Register Transfer using Digital Logic Circuits
  7. Thinking Process for ISA Design
  8. Introduction to the ISA of the FALCON-A and Examples
  9. Behavioral Register Transfer Language for FALCON-A, The EAGLE
  10. The FALCON-E, Instruction Set Architecture Comparison
  11. CISC microprocessor:The Motorola MC68000, RISC Architecture:The SPARC
  12. Design Process, Uni-Bus implementation for the SRC, Structural RTL for the SRC instructions
  13. Structural RTL Description of the SRC and FALCON-A
  14. External FALCON-A CPU Interface
  15. Logic Design for the Uni-bus SRC, Control Signals Generation in SRC
  16. Control Unit, 2-Bus Implementation of the SRC Data Path
  17. 3-bus implementation for the SRC, Machine Exceptions, Reset
  18. SRC Exception Processing Mechanism, Pipelining, Pipeline Design
  19. Adapting SRC instructions for Pipelined, Control Signals
  20. SRC, RTL, Data Dependence Distance, Forwarding, Compiler Solution to Hazards
  21. Data Forwarding Hardware, Superscalar, VLIW Architecture
  22. Microprogramming, General Microcoded Controller, Horizontal and Vertical Schemes
  23. I/O Subsystems, Components, Memory Mapped vs Isolated, Serial and Parallel Transfers
  24. Designing Parallel Input Output Ports, SAD, NUXI, Address Decoder , Delay Interval
  25. Designing a Parallel Input Port, Memory Mapped Input Output Ports, wrap around, Data Bus Multiplexing
  26. Programmed Input Output for FALCON-A and SRC
  27. Programmed Input Output Driver for SRC, Input Output
  28. Comparison of Interrupt driven Input Output and Polling
  29. Preparing source files for FALSIM, FALCON-A assembly language techniques
  30. Nested Interrupts, Interrupt Mask, DMA
  31. Direct Memory Access - DMA
  32. Semiconductor Memory vs Hard Disk, Mechanical Delays and Flash Memory
  33. Hard Drive Technologies
  34. Arithmetic Logic Shift Unit - ALSU, Radix Conversion, Fixed Point Numbers
  35. Overflow, Implementations of the adder, Unsigned and Signed Multiplication
  36. NxN Crossbar Design for Barrel Rotator, IEEE Floating-Point, Addition, Subtraction, Multiplication, Division
  37. CPU to Memory Interface, Static RAM, One two Dimensional Memory Cells, Matrix and Tree Decoders
  38. Memory Modules, Read Only Memory, ROM, Cache
  39. Cache Organization and Functions, Cache Controller Logic, Cache Strategies
  40. Virtual Memory Organization
  41. DRAM, Pipelining, Pre-charging and Parallelism, Hit Rate and Miss Rate, Access Time, Cache
  42. Performance of I/O Subsystems, Server Utilization, Asynchronous I/O and operating system
  43. Difference between distributed computing and computer networks
  44. Physical Media, Shared Medium, Switched Medium, Network Topologies, Seven-layer OSI Model