ZeePedia

WIRING METHODS:Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing

<< GROUNDING:Grounds to Metallic Water-Piping Systems, Bolted Connections
CONDUITS:Busway Systems, Conduit Bending Radiuses, Conduit Supports >>



This part of ZeePedia is being updated, Please try again later.
Sorry for inconvenience. Thanks
Table of Contents:
  1. INTRODUCTION:REFERENCED MATERIALS, THE INSPECTOR’S ROLE
  2. DESIGN QUALITY CONTROL:Design Quality Control Checklists, Drawing Checklist
  3. INTERIOR ELECTRICAL:General Guidelines, Temporary Electric, Visual Inspection
  4. CONDUCTORS:Wire Sizes, Voltage Drops, Amperage Capacities, Bolts, Nuts, and Washers
  5. GROUNDING:Grounds to Metallic Water-Piping Systems, Bolted Connections
  6. WIRING METHODS:Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing
  7. CONDUITS:Busway Systems, Conduit Bending Radiuses, Conduit Supports
  8. OUTLETS:Device Plates, Switches, Pull and Junction Boxes, Receptacles
  9. CUTTING, DRILLING, OR NOTCHING OF WOOD CONSTRUCTION
  10. SERVICE EQUIPMENT:Circuit Panels, Panel Boards, Cabinets, Fuses
  11. LAMPS AND LIGHTING FIXTURES
  12. TRANSFORMERS:Dry Type Transformers, Bushings, Insulating Liquid, Ventilation
  13. MISCELLANEOUS ELECTRICAL SYSTEMS:Switch Gears, Elevator Installations
  14. ELECTRICAL TESTS:Records of Tests, Description of Tests, Megger Tests
  15. EXTERIOR ELECTRICAL:Wood Poles, Crossarms, Insulators, Guying
  16. SERVICE:Aerial Installation, Lightning Arresters, Grounding, Direct Burial Cable
  17. ELECTRICAL HEATING:Storage and Handling, Layout of Work, Electric Heaters
  18. ALARM AND DETECTION SYSTEMS:Coordination of Work, Fire Alarm Stations
  19. RESIDENTIAL AND LIGHT COMMERCIAL:Electrical Equipment, Terminals, Electrical Formulas